Driver PaP DM542T 4.2A

INFO

The DM542T is a fully digital stepper driver developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. Its motor auto-identification and parameter auto-configuration feature offers quick setup to optimal modes with different motors. Compared with traditional analog drives, DM542T can drive a stepper motor at much lower noise, lower heating, and smoother movement. Its unique features make DM542T an ideal choice for high requirement applications. It is highly recommended to work asnema 17 driver and nema 23 driver

El driver DMT542T para motores paso a paso, es un driver totalmente digital que integra un avanzado algoritmo de control por DSP basado en las tecnologías más recientes de control de movimiento. El dispositivo entrega un nivel muy alto de suavidad en el movimiento, entregando un torque optimo y nulas inestabilidades.

ESPECIFICACIONES TÉCNICAS

• Input voltage 20-50VDC
• Anti-Resonance provides optimal torque and nulls mid-range instability
• Motor auto-identification and parameter auto-configuration when power on, offer optimal responses with different motors
• Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movement
• 15 selectable microstep resolutions including 400, 800, 1600, 3200, 6400, 12800, 25600, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 25000
• Soft-start with no “jump” when powered on
• 8 selectable peak current including 1.00A, 1.46A, 1.91A, 2.37A, 2.84A, 3.31A, 3.76A, 4.20A
• Pulse input frequency up to 200 KHz, TTL compatible and optically isolated input
• Automatic idle-current reduction
• Suitable for 2-phase and 4-phase motors, works well as nema 17 driver, nema 23 driver
• Support PUL/DIR mode
• Over-voltage and over-current protections

• Output Peak Current: 1.0~4.2A (3.0 RMS)
• Input Voltage: +20~50VDC (Typical 36VDC)
• Logic Signal Current: 7~16mA (Typical 10mA)
• Pulse Input Frequency: 0~200kHz
• Pulse Width: 2.5μS
• Isolation Resistance: 500MΩ

• Cooling: Natural Cooling or Forced cooling
• Environment: Avoid dust, oil fog and corrosive gases
• Ambient Temperature: 0℃ － 65℃
• Humidity: 40%RH－90%RH
• Operating Temperature: -10℃ － 45℃
• Vibration: 10-55Hz / 0.15mm
• Storage Temperature: -20℃ － 65℃
• Weight: Approx.210g (7.4oz)

LINKS

• Manual: https://www.omc-stepperonline.com/download/DM542T.pdf
• Web: https://www.omc-stepperonline.com/digital-stepper-driver-10-42a-20-50vdc-for-nema-17-23-24-stepper-motor-dm542t.html